ALUMINA and POLISHES FOR STONE and METALS
Write Gemstoneworld or call for special pricing on two Polishes or more at 253-588-2350
From Reynolds Chemicals comes superior aluminum oxide polishing compounds for both tumbling and lapping processes. New processing techniques produce this extremely fine, well graded polish that in most cases out-performs all other polishing compounds except diamond dust. It compares with the old Linde and tin oxide compounds at considerably less cost.
USING Reynolds Alumina Polish for Flat Laps, Discs, Belts.
All Reynolds Chemicals Alumina slurries for flat laps, discs and belts are simple to make. Mix polish either with water, mineral oil or a 50-50 oil and diswashing detergent mixture.
POLY-AL is our SUPER POLISH. It has an ideal particle size, 0.2 microns, to put a super polish on almost any stone that has been prepared properly for polishing.
Order # 401-ALF-4 - 4 oz size - Ship Wt. 8 oz - us$6.04
Order # 401-ALF-1 - 1 lb size - Ship Wt. 1 1/4 lbs - us$22.40
Order # 401-ALF-5 - 5 lb size - Ship Wt. 5 1/4 lbs - us$106.52
POLY-AL Z is our most ECONOMICAL polishing powder. Gives an excellent polish if given additional time. It is 0.35 microns.
Order # 401-ALZ-4 - 4 oz size - Ship Wt. 8 oz - us$4.24
Order # 401-ALZ-1 - 1 lb size - Ship Wt. 1 1/4 lbs - us$14.73
Order # 401-ALF-5 - 5 lb size - Ship Wt. 5 1/4 lbs - us$69.09
POLY-AL T is SUBMICRON. At 0.8 microns and hard enough to prepare stones for polishing if silicon carbide is used for sanding. As a polish, it is a major improvement over tin oxide. On flat laps, it polishes stones faster than anything but diamond dust.
Order # 401-ALT-4 - 4 oz size - Ship Wt. 8 oz - us$4.03
Order # 401-ALT-1 - 1 lb size - Ship Wt. 1 1/4 lbs - us$14.15
Order # 401-ALT-5 - 5 lb size - Ship Wt. 5 1/4 lbs - us$66.25
POLY-AL LS is an AGGRESSIVE powder. At 1.4 - 1.6 microns, it is an ideal pre-polish.
Order # 401-AL-LS-4 - 4 oz size - Ship Wt. 8 oz - us$2.83
Order # 401-AL-LS-1 - 1 lb size - Ship Wt. 1 1/4 lbs - us$9.71
Order # 401-AL-LS-5 - 5 lb size - Ship Wt. 5 1/4 lbs - us$45.43
This is one of the best all purpose polishers. Will provide an excellent polish on almost all stones.
Order # 400-AN-80 -- Net Weight - 1 lb Standard Grade
Shipping Weight - 1 lb 8 oz -- us$7.50
Order # 710-85-2003-1 -- Net Weight - 1 lb Optical Grade
Shipping Weight - 1 lb 8 oz -- us$15.15
Puts an excellent polish on almost all gemstones, including the hard-to-polish ones.
Order # 400-AN-90-4 -- Net Weight - 1/4 lb
Shipping Weight - 6 oz -- us$4.75
Order # 400-AN-90-1 -- Net Weight - 1 lb
Shipping Weight - 1 1/4 lb -- us$18.50
A hard, finely pulverized pyrochemically produced compound suitable for polishing gems of various hardness. Use Lusterite I as you would cerium or tin oxide. Use Lusterite II for tumbling. Mixes with water, easy to clean up.
Order # 400-AL-65 Lusterite I -- Net Weight - 1 lb
Shipping Weight - 1 lb 8 oz -- us$6.50
Order # 400-AL-75 Lusterite II -- Net Weight - 1 lb
Shipping Weight - 1 lb 8 oz -- us$6.50
For use as a pre-polish on soft and difficult to polish stones such as Apache Tears and Tigereye. Can also be used as a final polish on extremely hard materials ( + 8 on MOH scale ) Great for slabs. 600 grit.
Order # 400-AN-80 -- Net Weight - 1 lb
Shipping Weight - 2 lbs -- us$8.50
The standard compound for a final coloring and a high polish on precious metals such as gold and silver. Not for burnished surfaces.
Order # 405-AR-50 -- Bar Weight - 1 3/4 lbs
Shipping Weight - 2 lbs -- us$8.50
The most popular general compound for cutting down and buffing base metals. Gives a smooth, satin finish to copper, aluminum, pewter, gold and even hard plastic surfaces. Also ideal for preliminary coloring operations. Comes in Bar form.
Order # 405-AT-20 -- Net Weight - approx 1 lb
Shipping Weight - 2 lbs -- us$2.75
Produces a super bright finish on most white metals. This rouge has some cutting action and should not be used on plated articles. Works like ZAM on stones. Comes in Bar form.
Order # 405-AG-30 -- Net Weight - approx. 1 1/4 lbs
Shipping Weight - 2 lbs -- us$6.25
Fast cutting, produces high gloss finish on white metal such as stainless and chrome. Bar form.
Order # 405-AW-40 -- Net Weight - approx. 1 1/4 lbs
Shipping Weight - 2 lbs -- us$6.00
DEALERS WANTED WORLD WIDE !
Inquire Here
Your Internet Email Address:
